BendPak HD9 4 Post Car Truck Lift, 9,000 Pound Lifting Capacity

Description

Multi-position safety locks in each column, This BendPak lift has a 9,000-lb. capacity, Has fully enclosed lifting cables, safety locks and sheaves, The special runways accommodate narrow and standard vehicles, It is CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
BendPak HD9 4 Post Lift, 9,000 Pound Lifting Capacity
Sku # 9105175861
Mfr. Part # 5175861
Condition
New
Brand
BendPak
Sold
Each
Details
Notes
Due to the shipping weight and dimensions of this item, it is required that it be shipped to a business address that will have either a receiving dock or fork lift at the delivery destination to allow for the item to be unloaded from the truck/trailer at the time of delivery.
Product/photo update: This unit is now provided gray in color and not blue as shown or previously shown/offered.
Info
The space-saving design of the BendPak 9,000-lb. capacity HD-9 is ideal for vehicle storage in residential garages or commercial buildings. It also doubles as a great service lift for smaller shops who still want to do a big business.
No special foundation is required and the installation is a cinch.
The
BendPak HD-9 car lift is about the size of a typical parking space and will truly maximize your valuable floor area. Use the BendPak HD-9 for storing ATVs, snowmobiles, jet skis, golf carts, boats or just about anything else that needs to be off the ground. Now you can finally make use of that wasted vertical space above your car. If you’ve got at least standard 8-foot ceiling, this BendPak lift will work for you.
9,000-lb. maximum lifting capacity
CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
Freestanding design
Perfect for parking, storage and service
Runways accommodate narrow and standard vehicles
Runways include rail-kit for optional accessories
Electric / hydraulic power system
Single hydraulic cylinder mounted underneath runway
Fully enclosed lifting cables, safety locks and sheaves
Internal anti-sway slider blocks in each column
Oversized self-lubricating cable rollers
Features heavy-duty 3/8" aircraft cable
Rugged 1-1/4" roller axles
Multi-position safety locks in each column
Adjustable lock ladders
Runways feature non-skid surface
Push-button pneumatic safety release
Independent backup slack-cable safety latches
Customizable power unit location
Removable approach ramps for additional drive-under clearance
Longer approach ramps for low-ground clearance vehicles
ETL Approved
For more information check out ,
(PDF),
Four-Post-Cylinder-Design
(JPEG), and (PDF)
Specs
Sold in Quantity
Each
Motor
220 VAC / 60 Hz / 1 Ph
Max Lifting Height
74-1/2
Locking Positions
12
Overall Width
110-1/4
Overall Length
200
Outside Length
174
Rise
70
Height of Columns
88
Runway Min Height
4-1/2
Width Between Posts
100-1/4
Runway Width
19
Width Between Runways
37-1/2 to 44-3/8
Length of Runways
164
Min. Wheelbase (Rated Capacity)
115
Min. Wheelbase (75% Capacity)
100
Min. Wheelbase (50% Capacity)
85
Min. Wheelbase (25% Capacity)
70
Lock Spacing
Every 4
Lifting Capacity
9,000
Time to Full Raise
45
GTIN Code
00849672001423
MFG. Part #
5175861
Related Items / Suggested Parts
BendPak HD-9XW Four Post Lift, 9,000 Pound Lifting Capacity
BendPak HD9ST Four Post Lift, 9,000 Pound Lifting Capacity
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.