Ranco ETC-111000-000 Digital Electronic Temperature Control 120/208/240 VAC

• Popularity - 37546 views, 5363.7 views per day, 7 days on eBay. Super high amount of views. 1574 sold.
• Price - Avg: $0.00, Low: $0.00, High: $0.00. Best quality when compared to PicClick similar items.
• Seller - + items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

Template By Froo!<br>RANCO ETC-111000 DIGITAL TEMPERATURE CONTROL 120 - 240V<br>Ranco ETC-111000 Digital Electronic Temperature Control 120/208/240 VAC<br>***Does NOT Include A Power Cord. This Must Be Purchased And Wired Separately***<br>Specifications<br>Temperature Setpoint Range: -30° to 220°F<br>Differential Range: 1 to 30 Degrees F<br>Input Power Requirements: 120/208/240 VAC<br>Sensor: Thermistor, 2" long x 1/4" Diameter, with 8' cable<br>***NOTE FOR SUBMERSIBLE SENSING YOU MUST USE A WELL***<br>Control Ambient Temperatures: Operating 20°F-140°F, Storage 40°F-176°F<br>Ambient Humidity: 0 to 95% RH, non-condensing<br>Enclosure: NEMA 1<br>Dimensions: 6.52" high x 2.7" wide x 2.48" deep<br>Agency Approvals: UL Listed, CSA Certified<br>Switch Action: SPDT<br>The Ranco ETC is a microprocessor-based family of temperature controls designed to provide on/off control for commercial heating, cooling, air conditioning and refrigeration applications. With its wide temperature range, one and two stage capability, selectable heating/cooling modes and multi-voltage input, the ETC is one of the most versatile temperature controls available. Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1° resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display. When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized. The ETC line includes both one and two stage models. On two stage controls, each stage can be set independently thus eliminating the bothersome task of calculating interstage temperatures. And two stage models can be set up with overlapping heating or cooling stages. The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire. Every ETC model is equipped with diagnostic programs that check for hardware, software or system problems and display different error codes to indicate where the trouble is. The ETC also has a keypad lockout switch to prevent tampering with the control settings by unauthorized personnel. The ETC display temperature may not be calibrated in the field. {\b Agency Approvals}: UL listed, file E94419, Guide XAPX & CSA certified, file LR68340. class 4813 02.<br>Remote temperature sensing: The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire.<br>Optional analog output : ETC models are available with a 0 to 10 volt analog output that can be used for remote temperature indication or as input to a central monitoring system. This signal is a linear representation of the sensor temperature with 0 volt –30°F and 10 volts = 220°F.<br>Perfect temperature control for home brewing and reptile tanks<br>Ranco ETC-111000-000, ETC111000, ETC111000000<br>Same as Grainger 3ZP77, Johnstone L38-382<br>Also Replaces 123329 NORLAKE Exact, 2302100 TRAULSEN Functional, ETC-111000 UNI-LINE Exact<br>